- Main Stream : Monitoring mode:
50 Hz: up to 50 fps (3840 × 2160, 3072 × 1728, 2560 × 1440, 1280 × 720), up to 100 fps (1920 × 1080)
60 Hz: up to 60 fps (3840 × 2160, 3072 × 1728, 2560 × 1440, 1280 × 720), up to 120 fps (1920 × 1080)
50 Hz: 25 fps (4000 × 3000,4608 × 2592)
60 Hz: 24 fps (4000 × 3000,4608 × 2592)
*High frame rate is supported under monitoring mode only.
smart mode:
50 Hz: 25 fps (4000 × 3000,4608 × 2592,3840 × 2160, 3072 × 1728, 2560 × 1440, 1920 × 1080, 1280 × 720)
60 Hz: 24 fps (4000 × 3000,4608 × 2592, 3840 × 2160, 3072 × 1728, 2560 × 1440, 1920 × 1080, 1280 × 720)
- Sub-Stream : 50 Hz: 25 fps (1280 × 720, 704 × 576, 640 × 480)
60 Hz: 24 fps (1280 × 720, 704 × 480, 640 × 480)
- Third Stream : 50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480)
60 Hz: 24 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)
- Fourth Stream : 50 Hz: 25 fps (1280 × 720, 704 × 576, 640 × 480)
60 Hz: 24 fps (1280 × 720, 704 × 480, 640 × 480)
- Fifth Stream : 50 Hz: 25 fps (1280 × 720, 704 × 576, 640 × 480)
60 Hz: 24 fps (1280 × 720, 704 × 480, 640 × 480)
- Video Compression : Main stream: H.265+/H.265/H.264+/H.264,
Sub-stream: H.265/H.264/MJPEG,
Third stream: H.265/H.264,
Fourth stream: H.265/H.264/MJPEG,
Fifth stream: H.265/H.264/MJPEG
- Video Bit Rate : 32 Kbps to 16 Mbps
- H.264 Type : Baseline Profile,Main Profile,High Profile
- H.265 Type : Main Profile
- Bit Rate Control : CBR,VBR
- Scalable Video Coding (SVC) : H.264 and H.265 encoding
- Region Of Interest (ROI) : 4 fixed regions for each stream
- Target Cropping : Yes
- Multi-Target-Type Detection : Supports simultaneous detection and capture of human body, face, and vehicle,
Gets 7 face features,
Gets 13 human body features,
Gets 2 vehicle features,
Supports counting the number of line crossing targets by type, including human body, non-motor vehicle, motor vehicle,
Supports dynamic mosaic mask
- Face Capture : Detects up to 60 faces simultaneously, captures up to 60 face pictures per frame simultaneously and uploads up to 10 face pictures per second,
Supports swing left and right from -70° to 70°, tilt up and down from -50° to 50°,
Uploads face with background and closed-up face pictures,
Supports best shot and quick shot for capture mode,
Supports dynamic mosaic mask,
Gets 7 face features
- Face Comparison : Up to 10 face libraries. 30,000 faces for each library. 150,000 faces in total,
Supports face library encryption
- Perimeter Protection : Line crossing, intrusion, region entrance, region exiting
Support alarm triggering by specified target types (human and vehicle)
Support combined event alarm triggering
- People Counting : Supports Multi-Dimension People Counting,
Supports counting, displaying and exporting the people flow data of entering, exiting and passing by (The data is stored in the flash.),
Supports real-time uploading and uploading by statistic cycle,
Supports generating daily, weekly, monthly or annually reports,
Supports dynamic deduplication based on face picture comparison, and can filter out the target with the same custom face pictures, same attributes, or filter out repeated invalid targets within the set time interval,
Supports face feature deduplication,
Supports people flow data replenishment
- Queue Management : Supports up to 8 detection regions, and independent arming schedule and linkage method
Supports 2 detection modes: regional people queuing-up, waiting time detection
Generates reports to compare the efficiency of different queuing-ups and display the changing status of one queue
Supports raw data export for further analysis
Supports real-time data uploading and scheduled data uploading
Regional people queuing-up: supports 4 alarm trigger conditions, including greater than threshold, less than threshold, equal to threshold, not equal to threshold
Waiting time detection: supports 1 alarm trigger condition, including greater than threshold
- Heat Map : A graphic description of visits (by calculating amount of people or amount of dwell time) in a configured area.,
Two report types are available, space heat map and time heat map line chart.
- Hard Hat Detection : Detects up to 30 human targets simultaneously
Supports up to 4 shield regions
- Metadata : Intrusion detection,line crossing detection,region entrance detection,region exiting detection,face capture,multi-target-type detection
- Regional People Counting : Supports up to 8 detection regions, and independent arming schedule and linkage method
Supports 3 detection modes: people density detection, number of people exception detection, waiting time exception detection
Supports parameter settings: alarm times per exception, alarm interval, first alarm delay
Supports searching real-time number of people
People density detection: supports scheduled uploading, number of people change uploading, congestion level uploading
Number of people exception detection: supports 6 alarm trigger conditions, including greater than threshold A, less than threshold A, equal to threshold A, not equal to threshold A, greater than threshold A and less than threshold B, less than threshold A or greater than threshold B (threshold A should be less than threshold B)
Waiting time exception detection: supports 3 alarm trigger conditions, including greater than threshold A, less than threshold A, greater than threshold A and less than threshold B (threshold A should be less than threshold B)
- On/Off Duty Detection : Supports up to 8 detection regions, and independent arming schedule and linkage method
Supports 2 detection modes: absence detection, on/off duty detection
Supports parameter settings: person on duty, absence duration