Carabiner For Fall Protection Lanyard

• Carabiners are devices used for securing rope, wire and gear on harnesses for climbing, rescuing and industrial purposes.
• They are usually made of steel and aluminum with gates.
• Gates allow users to attach rope, gear and other needed accessories to the carabiners.
• They come in oval and D shapes with different gate types for using with different rope diameters.
• Their surface treatment can be white zinc galvanized, yellow zinc galavanized or electrical coat finish.
• Most of our products are CE, ANSI and CSA certified and meet the CE standard EN362-2004, ANSI standard Z359.12-09 and CSA standard Z259.12-16.

Offers full range of accessories rated to the safety harness, including scaffolding hook, snap hook, carabiner, rope adjusters, etc. All accessories are stress tested to withstand high dynamic loading without failing.

Carabiner For Fall Protection Lanyard: Carabiners are hardwares used for securing rope, wire and gear on harnesses for climbing, rescuing and industrial purposes. They are usually made of alloy steel or aluminum with gates. Gates allow users to attach rope, gear and other needed accessories to the carabiners. Carabiner at the end of Fall Protection Lanyard, wire or gear comes in oval and D shapes with different gate types for using with different rope diameters.Their surface treatment can be white zinc galvanized, yellow zinc galavanized or electrical coat finish. Most of our carabiner For Fall Protection Lanyard are CE, ANSI and CSA certified and meet the CE standard EN362-2004, ANSI standard Z359.12-09 and CSA standard Z259.12-16.

To guarantee the quality, our standard finishes exceed minimum 48 hours spray resistance as required by the EN362:2004 or ANSI Z359.12-2009 standard. Special finish corrosion resistance is available upon request. Also hardness test, bending test and tensile strength test are carried to the carabiner For Fall Protection Lanyard. The capacity of our Universal Tensile Strength Testing Equipment is 50kN. We use this Equipment to test the strength of webbing, rope and hardware components with different moulds. When we receive each batch of raw materials or accessories, we will carry out sampling strength test according to relevant standards or customers’ requirements, so as to fundamentally control the quality of our products.

There critical steps to ensure the quality:

Ø spectrographic analysis

Ensure proper metallurgy content of all raw materials.

Ø Proof load Testing

All safety harness connecting components are 100% proof loaded to 3600IBS/16KN.

Ø Ultimate breaking Load Test

Connecting and adjusting components are batch tested for ultimate breaking strength.

-connecting components-exceed 5000lBS

-adjusting components-exceed 4000lBS

Shipping Way