CE/ANSI Alloy Steel Or Aluminum Scaffold Hook For Lanyard
Description
Featured as a critical component for PPE equipment, the minimal strength of the alloy steel scaffold hook and aluminum scaffold hook is 22KN according to CE standard and 25KN according to ANSI standard.
Description
Parameters
| ITEM NO.: | HD01 | HD02 | HD03 | HD04 |
| DESCRIPTION OF GOODS: | SCAFFOLD HOOK (CE) | SCAFFOLD HOOK (ANSI) | SCAFFOLD HOOK (CE) | SCAFFOLD HOOK (CE) |
| MATERIAL: | ALLOY STEEL | ALLOY STEEL | ALUMINIUM | ALLOY STEEL |
| WEIGHT: | 477g | 756G | 491G | 650G |
| STRENGTH: | 25KN | 23KN | 25KN | 25KN |
| GATE FACE STRENGTH: | 1KN | 3600LBS | 1KN | 3600LBS |
| GATE OPENING: | 50MM | 65MM | 60MM | 65MM |
| TEM NO.: | HD05 | HD06 | HD07 | HD08 |
| DESCRIPTION OF GOODS: | SCAFFOLD HOOK (ANSI) | SCAFFOLD HOOK (CE) | SCAFFOLD HOOK (CE) | SCAFFOLD HOOK (ANSI) |
| MATERIAL: | ALLOY STEEL | ALUMINIUM | ALUMINIUM | ALLOY STEEL (INSULATED) |
| WEIGHT: | 650G | 1014G | 286G | 584G |
| STRENGTH: | 25KN | 25KN | 25KN | 23KN |
| GATE FACE STRENGTH: | 3600LBS | 1KN | 1KN | MINIMUM 9KV DIELECTRIC RESISTANCE |
| GATE OPENING: | 65MM | 110MM | 50MM | 55MM |
Featured as a critical component for PPE equipment, the minimal strength of the alloy steel scaffold hook and aluminum scaffold hook is 22KN according to CE standard and 25KN according to ANSI standard. No matter it is alloy steel or aluminum scaffold hook, it is CE, ANSI and CSA certified and meet the CE standard EN362-2004, ANSI standard Z359.12-09/17 and CSA standard Z259.12-11/16. The scaffold hook is widely used for rope lanyard and webbing lanyard. It has been exported to more than 85 countries and regions throughout the world in Europe, America, Mid-east area, Australia, Southeast Asia, Africa etc.
As a attachment for safety harness lanyard, the lanyard scaffold hook is made of alloy steel or aluminum. Some special purpose scaffold hooks, such as insulated scaffold hook and dielectric scaffold hook, are plastic coated, which can offer a minimum 9kV dielectric resistance. The scaffold hook differs from each other not only in material, but also in style and surface treatment. Zinc plated, polished; Zinc plated, matte and yellow zinc plated, matte are available for surface finish.
There critical steps to ensure the quality:
Ø Spectrographic analysis
Ensure proper metallurgy content of all raw materials.
Ø Proof load Testing
All safety harness connecting components are 100% proof loaded to 3600IBS/16KN.
Ø Ultimate breaking Load Test
Connecting and adjusting components are batch tested for ultimate breaking strength.
-Connecting components-exceed 5000lBS
-Adjusting components-exceed 4000lBS
Terms and Definitions
1. Termination connector (class T)
Self-closing connector designed to allow the fixing as an element of a sub-system in such a way that the loading is in a predetermined direction.
2. Anchor connector (class A)
Connector which closes automatically, designed to be linked directly to a specific type of anchor as a component.
3. Screwlink connector (class Q)
Connector which is closed by a screw-motion gate, which is a load bearing part of the connector when fully screwed up (see Figure 4), intended to be used only for long-term or permanent connections.
4. Gate
Part of the connector which can be moved to open it
NOTE The gate can, for example, move by pivoting about a hinge (hinged gate), or by a sliding motion (sliding gate) or by a screw motion (screw-motion gate).
5. Self-closing gate
Gate which moves automatically to the closed position when released from any open position.