CE/ANSI Cerificate Alloy Steel Or Aluminum Adjuster For Safety Harness
Description
Featured as a critical component for safety harness kit, the minimal strength of the alloy steel adjuster and aluminum adjuster is18KN. No matter it is alloy steel or aluminum adjuster it is CE and ANSI and CSA certified and meet the CE standard EN362-2004, ANSI standard Z359.12-09 and CSA standard Z259.12-16.
Parameters
| ITEM NO.: | HD44-1 | HD44-2 | HD45 | HD46-1 | HD46-2 |
| DESCRIPTION OF GOODS: | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) |
| MATERIAL: | ALLOY STEEL | ALLOY STEEL | ALLOY STEEL | ALLOY STEEL | ALLOY STEEL |
| WEIGHT: | 56/60G | 41G | 54G | 44G | |
| WIDTH: | 45/50MM | 50MM | 45MM | 45MM | |
| STRENGTH: | 22.2KN | 22.2KN | 18KN | 18KN |
| ITEM NO.: | HD47-1 | HD47-2 | HD48-1 | HD48-2 | HD49 |
| DESCRIPTION OF GOODS: | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) |
| MATERIAL: | ALLOY STEEL | ALLOY STEEL | ALLOY STEEL (INSULATED) | ALLOY STEEL (INSULATED) | ALLOY STEEL |
| WEIGHT: | 30G | 19G | 58G | 43G | 136G |
| WIDTH: | 45MM | 45MM | 45MM | 45MM | 45MM |
| STRENGTH: | 18KN | 18KN | 18KN | 18KN | 18KN |
| SPECIAL | MINIMUM 9KV DIELECTRIC RESISTANCE | MINIMUM 9KV DIELECTRIC RESISTANCE |
| ITEM NO.: | HD50 | HD51 | HD52 | HD53 | HD54 |
| DESCRIPTION OF GOODS: | ADJUSTER (ANSI) | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) | ADJUSTER (CE) |
| MATERIAL: | ALLOY STEEL | ALUMINIUM | ALLOY STEEL | ALUMINIUM | ALLOY STEEL |
| WEIGHT: | 83G | 72G | 89G | 43G | 47G |
| WIDTH: | 45/50MM | 45MM | 45MM | 30MM | 30MM |
| STRENGTH: | 18KN | 8KN | 18KN | 18KN | 18KN |
Featured as a critical component for safety harness kit, the minimal strength of the alloy steel adjuster and aluminum adjuster is18KN. No matter it is alloy steel or aluminum adjuster it is CE and ANSI and CSA certified and meet the CE standard EN362-2004, ANSI standard Z359.12-09 and CSA standard Z259.12-16. The adjuster is widely used to adjust length of thigh strap,chest strap and shoulder strap for fall arrest safety harness.It has been exported to more than 85 countries and regions throughout the world in Europe, America, Mid-east area, Australia, Southeast Asia, Africa etc.
As a component for safety harness, the safety harness adjuster is made of alloy steel or aluminum. Some adjusters for special surroundings, such as insulated safety harness adjuster and dielectric safety harness adjuster, are plastic coated, which can offer a minimum 9kV dielectric resistance. The adjuster differs from each other not only in material, but also in style and surface treatment. Zinc plated, polished; Zinc plated, matte and yellow zinc plated, matte are available for surface finish.
There critical steps to ensure the quality:
Ø Spectrographic analysis
Ensure proper metallurgy content of all raw materials.
Ø Proof load Testing
All safety harness connecting components are 100% proof loaded to 3600IBS/16KN.
Ø Ultimate breaking Load Test
Connecting and adjusting components are batch tested for ultimate breaking strength.
-Connecting components-exceed 5000lBS
-Adjusting components-exceed 4000lBS