Double Leg Elastic Fall Arrest Lanyard
Description
Length : 1.80 mtr
-These Lanyards come with Energy Absorption feature incorporated within their core, they do not require any additional Energy Absorber Pack, hence are lighter in weight.
-These Lanyards are ideal for use in conditions where there are chances of the user tripping over the Lanyard. The Elastic nature of the Lanyard reduces the actual effective length of the Lanyard thereby reducing trip hazards.
Product Introduction And Details
The double leg fall arrest lanayards are made of elastic webbing 28mm wide, which greatly reduces the total length of the webbing and thus reduces the risk of tripping. Double legs energy-absorbing lanyard, suitable for roof, elevated and working platform. The energy absorber at the end of the harness belt is made of 45mm webbing, which reduces the impact on the body when falling. During a drop event, a special ribbon inside the energy absorber opens. When a fall occurs, the open ribbon absorbs most of the shock. So, in the end, only a few vibrations fell on the workers. The hook and scaffold hook are made of high strength forged steel and coated with a colored coating to prevent corrosion and rust.
The elastic fall arrest lanyard with double legs is CE certified and conforms to European CE standards EN354-2010 and EN355-2002. Products are exported to Europe , the Middle East, Australia, Southeast Asia, Africa and more than 85 countries and regions around the world.
double lock forged steel snap hook,color coated, high strength
color coated scaffolding hook, large openning for more application, high strength
neat and firmly double box type stiching for maximum strength and durability
elastic webbing with protective tube to reduce the length of the lanyard to prevent tripping hazard.
Package
To suit the need of customers with different quality requirement,has various package at different cost for the elastic fall arrest lanyard for construction, including colorful plastic bags, cartons, colorful box, plastic hanger, knapsack, and so on.
Fall Clearance
There must be sufficient clearance below the anchorage connector to arrest a fall before the user strikes the ground or an obstruction.
When calculating fall clearance, account for a MINIMUM 3’ safety factor, deceleration distance, user height, length of lanyard/SRL, harness stretch, and all other applicable factors.
Diagram shown is an example fall clearance calculation ONLY.
Swing Falls: Prior to installation or use, make considerations for eliminating or minimizing all swing fall hazards. Swing falls occur when the anchor is not directly above the location where a fall occurs.
Always work as close to in line with the anchor point as possible. Swing falls significantly increase the likelihood of serious injury or death in the event of a fall.
Shipment
