Shock Absorber In Safety Harness

​The polyester webbing energy absorber is equipped on the rope lanyard or webbing lanyard for free fall arrest and elevated work platform purpose. It can effectively reduce the shock and hurt to the user and protect the life of the user.

The shock absorber in safety harness is equipped on the rope lanyard or webbing lanyard for free fall arrest and elevated work platform purpose. It can effectively reduce the shock and hurt to the user and protect the life of the user. The shock absorber allow to absorb the energy of fall by tearing of specific webbings or sewings. The polyester webbing absorber is CE certified and meets EN 355-2002 standard. It has been exported to more than 85 countries and regions throughout the world in Europe, America, Mid-east area, Australia, Southeast Asia, Africa etc.

Specification

1. Length with lanyard: Standard shock absorber to be used with lanyards up to 2M long.

2. Material: Polyester 100%

3. Standard: EN355-2002

4. Webbing width: 45mm

Caution

The shock absorber in safety harness must only be connected to front or back attaching point of full body harness.

1) It is strictly FORBIDDEN to connect the absorber with lanyard to the work positioning belt.

2) It is strictly FORBIDDEN to additional element between the absorber with lanyard and the structural ancher point.

How does the SHOCK ABSORBER WORK

In the event of a fall the special webbing inside the Energy Absorber opens up. This opening of the webbing takes up most of the jerk which is felt as an impact when a fall occurs. Hence finally very little jerk is felt on the body of the worker. We can therefore imagine that if this shock absorber is absent from a fall protection system, the forces which are felt on the body of the worker can be very high and can result in injury.

What Should be the Length of a FALL ARREST LANYARD

The standard maximum length of the Fall Arrest Lanyard is 2 meters. Important thing to note is to have a lanyard long enough to be used friendly, however, kept as short as possible, to minimize the free fall distance. All fall arrest lanyards are tested and certified as per EN 355:2002 for their maximum length of 2m.

Shipping way

The shock absorber in safety harness will be packed in carton, we can delivery goods by sea freight, air freight, express etc. according to your requirements. We can also cooperate with your another Chinese supplier to delivery goods together, TOHO will give you the best service.