Working Positioning Safety Belt

• Full body safety belt for working positioning 1 back D-ring for fall arrest; 2 D-ring at the waist level for working positioning
• 5 point adjustability
• Chest strap and leg straps are provided with pass thru buckles for easy adjustment
• Lanyard keepers on the shoulder straps for placement of free lanyard
• Ideally positioned butt-strap for extended comfort
• Comes with dual color scheme for easy differentiation of the shoulder and leg straps
• Equipped with fall indicator on shoulder strap

• A working positioning safety belt, also known as a positioning lanyard or belt, is a type of personal protective equipment (PPE) commonly used in various industries, such as construction, maintenance, and tree care. It is designed to provide support and restraint for workers while they perform tasks at height.
• The working positioning safety belt typically consists of a waist belt or harness that securely fits around the worker’s waist or hips. Attached to the belt is a lanyard or strap that allows the worker to position themselves comfortably while working at elevated locations, such as on scaffolding, towers, or poles.
• These belts are adjustable and often have multiple attachment points for connecting tools, equipment, or lifelines. They are generally made of durable materials, such as polyester webbing, and have sturdy buckles or fasteners to ensure proper fit and secure connection.

Below are detail introduction of TOHO’s safety harness which for working positioning use:

Those working positioning safety belt can be used for fall arrest, fall restraint and working position. The two lateral D rings allow workers to use both hands and keep the worker at a wanted place without swinging. It is especially suitable for rebar tying, concrete wall-form work, roofs, terraces, inclined surfaces and rock walls working.

The fall body safety belt with positioning D ring are widely used in arborist, power supplies, transmission, telecommunication, high rack, metal construction, scaffolding, wind energy, offshore industry, rope access and rigging, etc. The standard color of the safety belt is yellow and black. Users can easyily distinguish the upper part and lower part by the dual color scheme.

Besides, these two model have Lanyard keepers on the shoulder straps for placement of free lanyard. Certainly, we can also manufacture styles as per your requirement, such as color, metal parts,materials, etc. The safety belt for working positiong is ANSI certified and meet the ANSI: Z359.11-2014 standard.

We always provide the best selection of OSHA and ANSI-compliant safety belt to help you and your workers to get the job done and return home safely. Choose your safety belt from different functions, styles, buckles, and materials that work for construction, welding, wind energy, and more. If you do not know how to choose the right one, just fell free to contact with us, we will give you the best sollution.

The dual color scheme design of the webbing make the harness easy to wear. You can distinguish the shoulder and leg strap easily. and the harness can be worn following these simple steps:

Maintenance

Component parts and therefore the user’s safety. So please comply strictly with the following recommendations:
1. Clean the straps and buckles in water and household soap,in case of minor soiling, wipe the full body harness with cotton cloth or a soft brush. Do not use any abrasive material. Never place heavy items on top of it. For intensive cleaning , wash the harness in water at a temperature between 30 to 60 by using a neutral detergent(PH+_7). The washing temperature should not exceed 60 . Do not use acid or basic detergents. Follow the washing instructions absolutely without any deviations.
2.Use professional disinfectant without causing adverse effect on the materials, or conducted by a competent person for disinfecting
3. Allow the harness to dry naturally and shall be kept far from an open fire or any other source of heat. This also applies for harnesses that have gotten wet during use.

Periodic Examination

A competent person should periodically inspect and maintain records of the safety harness as mentioned in the attached Equipment control card.
1. The regular periodic examinations are very important, and that the safety of users depends upon the continued efficiency and durability of the equipment, at least once a year.
2. It is recommended that the harness should be inspected and examined by a competent person for any damage of failure if the need arise, and strictly in accordance Below item 4.
3. It is necessary of periodic examination when the equipment is complexity or innovation, and in the dismantling, reassembly ,or assessment of equipment. The periodic examination only be conducted by the manufacturer or by a person or organization authorized by the manufacturer.
4. Method of periodic examination could be carried out as follows:
A Inspect the webbing for any damages or cuts.
B Check all metal fittings for any damages or rust. Inspect for any cracks.
C Check all plastic fittings for any damages.
D Check all the stitches of the PPE.
E Maintain all inspection details on the Equipment control card.
F Annual control to be made evident by punching.
G Check the legibility of the product markings .