The DC PowerCube 24 VDC – 150 A offers a capacity of up to 4.3 kW, making it highly efficient for charging batteries and battery banks rapidly while also supplying power to both DC and AC loads, suitable for marine and mobile/off-grid applications. The DC PowerCube 24 VDC – 150 A functions effectively as a standalone power supply without the need for batteries, thanks to its exceptionally stable and ripple-free output voltage.
- DC power up to 150 A
- AC can be adjusted from 4 A to 16 A
- Provides up to 3.5 kW from land power
- Up to 4.3 kW from Genverter©
- Adjustable Genverter© load (as well as rpm)
- 12 VDC / 20 A output, three-step for 12 VDC batteries
- Standard analogue panel supplied
- WhisperConnect CAN-bus connection for central monitoring
- Suitable for worldwide use, 90 to 264 VAC, 50/60 Hz (automatically adjusts)
Robust Battery Charger/Power Supply
The DC PowerCube 24 VDC – 150 A serves as a battery charger and power supply, tailored for large-scale electrical systems with substantial battery banks and significant DC power needs. It efficiently converts power from the grid or generator into DC, suitable for lighting, electronic devices, pumps, and other DC-operated equipment.
Benefits of the DC PowerCube 24 VDC – 150 A
- High powered charger / power supply for entire DC-system
- Ultra-short charging time and therefore saves fuel
- Battery type adjustable from laptop or dipswitch settings: AGM, GEL, Lead acid, Traction, Lithium
- Smooth ripple-free DC output no “flickering” lights
- Can be connected to any mains voltage or capacity
- Dual input: AC supply supplemented with uniform Genverter© input
Product specifications
| ARTICLE NUMBER |
| 60202002 |
DC PowerCube 24 V – 150 A |
| DIMENSIONS & WEIGHT |
| Weight kg (lb.) |
26 (57.3) |
| Length x width x height, mm (in.) |
268 x 316 x 575 (10.6 x 12.4 x 22.6) |
| GENERAL SYSTEM SPECIFICATIONS |
| Nominal battery voltage |
24 VDC |
| Output current |
0 – 150 A (short circuit protected) |
| Output voltage |
26.5 / 28.5 VDC |
| Recommended battery capacity: |
300 to 1500 Ah |
| Charge characteristic |
3+ step charge characteristic |
| Slave charger |
12 V – 20 A (3+ step charge characteristic) short circuit protected |
| TECHNICAL SPECIFICATIONS |
| Supported battery types |
Open and sealed lead acid: Gel / Traction / AGM / Spiral and Lithium-ion |
| Battery leakage current |
<5 mA per battery |
| Charge voltages |
Bulk, Absorption, Float |
| Charge voltage AGM / GEL at 25°C |
28.80 VDC, 28.50 VDC, 27.20 VDC |
| Charge voltage Traction at 25°C |
29.20 VDC, 28.90 VDC, 26.50 VDC |
| Charge voltage Open lead acid at 25°C |
28.50 VDC, 28.50 VDC, 26.50 VDC |
| Charge voltage Lithium ION at 25°C |
28.80 VDC, 27.20 VDC, 26.50 VDC |
| Return current from absorption to float |
6% of Imax |
| PowerCube status on/off |
Digital output (relay, two-way contact) |
| Failure |
Digital output (relay, two-way contact) |
| AC grid disabled |
Digital input (potential free input, closed is disabled) |
| PM input disabled |
Digital input (potential free input, closed is disabled) |
| Conformity |
Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022,EN 61000-3-2, 62040-2 Low voltage directive 2006/95/EC: EN 62040-1-1, EN 50091-2, EN 60950-1 |
| PROTECTIONS |
| PM input isolation protection |
Yes (open collector output 30 VDC, 100 mA) |
| Over temperature protection |
Yes, derating above 40°C, shutdown at high temperatures. (with automatic restart after cooling down) |
| Overvoltage protection (manual restart needed) |
36 VDC + / – 0.5 VDC |
| Ingress Protection index |
IP21 |
| MECHANICAL SPECIFICATIONS |
| Main battery connection |
2 x M10 studs |
| Slave battery connection |
1 x M5 stud |
| Earth grounding lug |
1 x M6 stud |
| AC grid input |
3 x M3 screw terminal block |
| PM grid input |
3 x M3 screw terminal block |
| Remote control panel |
RJ12 |
| Battery temperature sensor |
RJ12 |
| Whisper Connect CANbus |
RJ45 |
| Voltage sense |
Phoenix MSTB 2.5 / 2-ST-5.08 |
| Digital outputs |
6 x fastons (6.3×0.8) |
| Digital inputs |
4 x fastons (6.3×0.8) |
| Operating temperature range |
-20 – 55°C (derating above 40°C) |
| Relative humidity in operation |
up to 95% without condensation |
| Ventilation |
Combined cooling (convection and forced (variable speed)) |
| Acoustic level |
<52 dB |
| Warranty |
2 years |
| Accessories |
Battery temperature sensor and remote control panel |
