EN And ANSI Standard Reflective Safety Harness Kit For Rescue

​This kind of safety harness kit is specially designed for rescue purpose. The multifunctional polyester safety harness kit is CE and ANSI certified and meet the EU CE standard EN361:2002 & EN813: 2008 and ANSI Z359.1. It has been exported to more than 85 countries and regions throughout the world in Europe, America, Mid-east area, Australia, Southeast Asia, Africa etc.

Universal size

• Certified by EN 358, EN361& EN813
• Attachment Elements – 1 Dorsal and 1 Sternal D-Ring for Fall Arrest.1 Ventral D -Ring at waist level for Rope Access work and 2 Lateral D- Rings for Work Positioning
• Specialized rope acess and rescue design.
• Cushioned shoulder, leg, waist pads keep the pressure off, providing extra worker comfort for long hours of wear. In a fall, they absorb shock and help distribute your weight. They are built-in type to avoid slipping. They can be removable if required.
• Light weight, moisture wicking, breathable waist lining, wicking moisture away from your body, so you stay dry and comfortable in heat or cold
• Convenience – An ideal combination of Fall Arrest, Work Positioning, Rescue and Rope access applications.
• Reflective belt can be designed to make it visible in dark environment.
• Customiziable webbing colors available

This kind of safety harness kit is specially designed for rescue purpose. The multifunctional polyester safety harness kit is CE and ANSI certified and meet the EU CE standard EN361:2002 & EN813: 2008 and ANSI Z359.1. It has been exported to more than 85 countries and regions throughout the world in Europe, America, Mid-east area, Australia, Southeast Asia, Africa etc.

Made of 45mm high strength polyester webbing and equipped with alloy steel D ring, the breaking strength of safety harness kit is not less than 22KN (ANSI standard no less than 25KN). And the breaking strength of plastic buckle and pad is not less than 18KN. To ensure the strength of the whole set, the hardware adopts 40Cr or 45# steel and the plastic part adopts PE material.

We have full sets of testing machine (Horizontal tensile testing machine, salt and spray testing machine, 8-meter fall attest testing tower and so on). To ensure the product quality and customer safety, static test for the safety harness and energy absorber, breaking strength test for the hardware and webbing, and 8-meter fall attest testing are conducted for a batch of safety harness.

Related Standards

EN361:2002-FULL BODY HARNESS

EN358:1999-BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARD

EN 813:2008 Personal fall protection equipment — Sit harnesses

Z359.1 personal fall arrest systems, subsystems and components

Hints:

Fall Clearance: There must be sufficient clearance below the anchorage connector to arrest a fall before the user strikes the ground or an obstruction. When calculating fall clearance, account for a MINIMUM 3’ safety factor, deceleration distance, user height, length of lanyard/SRL, harness stretch, and all other applicable factors. Diagram shown is an example fall clearance calculation ONLY. Swing Falls: Prior to installation or use, make considerations for eliminating or minimizing all swing fall hazards. Swing falls occur when the anchor is not directly above the location where a fall occurs.Always work as close to in line with the anchor point as possible. Swing falls significantly increase the likelihood of serious injury or death in the event of a fall.