Single Leg Elastic Energy Absorbing Polyester Webbing Lanyard With Energy Absorber For Fall Arrest And Elevated Work Platform

• The main feature of a Single Leg Elastic Energy Absorbing lanyard Model number HENP130 is its ability to absorb and dissipate the energy generated during a fall. This is achieved through the use of an integrated energy absorber, which is typically a tear-webbing.
• When a fall occurs, the lanyard elongates, allowing the energy absorber to activate and stretch or deform. As the energy absorber takes in the force of the fall, it slows down the user’s descent and reduces the impact forces on the body. This feature is crucial in preventing injuries that could result from sudden stops or high impact forces during a fall.
• The Single Leg Elastic Energy Absorbing lanyard also typically includes connectors at each end for easy attachment to the user’s harness or anchor point. These connectors are designed to securely hold the lanyard in place and provide reliable connection points.
• It is important to note that Single Leg Elastic Energy Absorbing lanyards are designed for single-person use and may have weight and length limitations specified by relevant safety standards. Additionally, proper inspection and maintenance are essential to ensure the lanyard’s integrity and effectiveness. Always follow the manufacturer’s instructions and guidelines for safe and correct usage of the lanyard.
• High strength connectors at two ends of the lanyard, it’s durable and safe.

Webbing specification:

• The Lanyards are made with 45mm wide elasticated webbing incorporated for contracting property.
• The material is high strength and durable polyester, the strength is 25kN.

WEBBING

Carabiner Specification:

• Carabiner Material: Alloy Steel
• Surface treatment: Golden galvanized
• Breaking strength:22KN
• Feature: strong and durable,economical and practical

CARABINER

Scaffold Hook Specification:

• Scaffold Hook Material:Alloy Steel
• Surface treatment: Golden galvanized
• Breaking strength:>22KN
• Feature: high strength and easy open, safety and durable

HOOK

Though TOHO’s safety lanyard has strictly checked one by one before delivery for following test:

1) Static Load test

2) UV test

3) 100% Visual inspection

4) Salt Spray Test

5) Pulling Force Test

6) Wear-resistant Test

7) Flame Retardant Test

8) Dynamic Test

You should also check the goods before everytime use, detail requirements as following:

1 FREQUENCY
The Energy absorbing lanyard must be inspected by a competent person other than the user at least annually. Record the results of each formal inspection in the equipment control card found at the end of this instruction.

2 INSPECTION STEPS
Step 1. Inspect energy absorbing lanyard or energy absorber component hardware (snap hooks, adjusters, swages, thimbles, etc.). These items must not be damaged,broken, distorted, or have any sharp edges, burrs, cracks, worn parts, or corrosion. Ensure the connecting hooks work properly. Hook gates must move freely and lock upon closing. Ensure adjusters (if present) work properly.
Step 2. Inspect the energy absorbing lanyard or energy absorber component per the following as applicable:
WEBBING AND STITCHING: The webbing material must be free of frayed, cut, or broken fibers. Check for tears, abrasions, mold, burns, or discoloration, etc. The webbing must be free of knots, excessive soiling, heavy paint buildup, and rust staining. Check for chemical or heat damage indicated by brown, discolored, or brittle areas. Check for ultraviolet damage indicated by discoloration and the presence of
splinters or slivers on the webbing surface.

All of the above factors are known to reduce webbing strength. Damaged or questionable webbing should be replaced.
Inspect stitching for pulled or cut stitches. Broken stitches may be an indication the energy absorbing lanyard or energy absorber component has been impact loaded and must be removed from service.
Step 3. ENERGY ABSORBING COMPONENT: Inspect energy absorber to determine ifit has been activated. There should be no evidence of elongation. Ensure energy absorber cover is secure and not torn or damaged.
Step 4. All labels should be present and fully legible.

3 If inspection reveals an unsafe condition, remove unit from service immediately and destroy, or contact an authorized service center.