Single Leg Polyester Webbing Lanyard With Energy Absorber

Designed for security and adaptability, as a vital link to their fall protection anchor point, this Single leg polyester webbing lanyard with energy absorber is specially used for fall arrest and elevated work platform. It is ideal for fall protection for fall arrest and elevated work platform. The one leg safety lanyard with energy absorber is CE certified and meet the EU CE standard EN354-2010, EN358 and EN355-2002. It has been exported to more than 85 countries and regions throughout the world in Europe, America, Mid-east area, Australia, Southeast Asia, Africa etc.

Single leg polyester webbing lanyard with energy absorber is made of 45MM high strength polyester webbing, its strength is no less than 22KN/5000LBS.

*Polyester webbing+alloy steel connectors, more protective and durable

*22 KN Tension, made up of 45MM high strength polyester webbing

*Safety protection webbing, suitable for high-altitude operation, more convenient for outdoor activities.

*Designed to reduce the risk of faling and sliping. You can easily maneuver around obstacles and obstuctions while remaining attached

*Loops protected by an abrasion resistant tubular webbing

1.General conditioning

Store sample lanyards at a temperature of (23 ± 5) °C and a humidity of (65 ±5) % for at least 24 h.

2.Conditioning to wet and cold

Immerse the sample lanyard in fresh water for a minimum of 1 h at a temperature of (23 ± 5) °C and then, within 90 s, place the sample lanyard in the refrigerated chamber for at least 4 h at a temperature of (-4+0/-2) °C.

3.Conditioning to very cold

If the manufacturer claims that the lanyard can be used below -30°C, condition the sample lanyard in accordance with 1. Place the sample lanyard in the refrigerated chamber for at least 2 h at the minimum temperature claimed by the manufacturer with a maximum temperature of (- 30 ± 2) °C.

Swing Falls: Prior to installation or use, make considerations for eliminating or minimizing al swing fall hazards. Swing falls occur when the anchor is not directly above the location where a fall occurs. Always work as close to in line with the anchor point as possibe. Swing fall significantly increase the likelihood of serious injury or death in the event of a fall.