Stainless Cable Fall Arrester

The retractable stainless cable fall arresters is one type of personal fall protection systems (EN363), can effectively eliminates tripping hazards while the inertia-locking mechanism arrests a fall within inches of activation. Most of our fall protection arrester is CE certified and meet EN standard EN360-2002 .

Retractable Type Fall Arresters are used as a component in a Personal Fall Protection Systems where a combination of worker mobility and fall protection is required.

• The Retractable Type Fall Arrester meets the requirements of European Directive 89/686/EC and complies with harmonized standard EN360.
• The connector meets CE EN362 requirement and can be used with personal fall protection systems such as a personal fall arrest, restraint, work positioning, suspension, or rescue system. The user must read and understand the manufacturer’s instructions for each component or part of the complete system. These connectors are designed to be used only as specified in each product’s user instructions.
• Workers using the equipment while working at height must be additionally protected with person protective equipment against falls from a height, according to EN363.

• EN361 – for the full body harness
• EN362 – for the connectors
• EN795 – for anchorages

It is important that the selection of a device is made after the purchaser and supplier have both fully understood the application of the equipment.

【 LIMITATIONS 】Whenever possible, it is strongly advised that the equipment be assigned personally to one and only one user.

• Never connect more than one person to the fall arrester.
• Must be used with an approved full body harness.
• Maximum load : 100 kg (body, clothing, tools, etc.)
• Recommended working temperature= -30°C to 50°C.
• Anchorage strength requirement is 12 kN.
• Avoid lanyard contact with sharp edges.
• The device should be anchored directly overhead to reduce swing fall hazard.
• Swing hazard angle must not exceed 30º
• Can not stop a sinking (pulverulent or muddy products)

CAUTION: Never permit more than one person at a time to be connected to the fall arrest device.

Applications

Professional technicians and equipment are critical for quality control. We have full sets of testing machine, such as Universal Tensile Strength Testing Equipment, Salt Spray Corrosion-resistance Testing Equipment, Webbing Wear-Resistance Testing Equipment, UV lamp testing Equipment,Flame-Resistance testing Equipment, bending test machine, hardness test machine and 8-meter fall attest testing tower, etc.

From raw material control to production process control to finished product testing control, we strictly follow the quality management system. Our factory is ISO9001:2015, ISO14001 and ISO45001 certified. Static strength test and Dynamic performance test for our products are conducted according to EN 364. We will do bending, hardness, Salt Spray Corrosion-resistance and tensile strength test for hardware to ensure its quality and your safety. For the webbing, we will do Wear-Resistance Test, UV lamp test and Flame-Resistance test, etc.