Click to enlarge
8 Port Fast Ethernet Smart POE Switch
Back to products
16 Port Gigabit Smart Switch
Hikvision

8 Port Gigabit Smart Switch

SKU: DS-3E1508-EI(O-STD) Category: Tags: , , ,
Additional information
Brand

Customer Application

Airports
Customer Type

Airports

,

Army

,

Commercial

,

Government Entities

,

Healthcare

,

Industrial

,

Jail / Prison

,

Law Enforcement

,

Medical

,

Navy / Coastal Protection

,

Oil & Gas

,

Other Businesses

,

Private Entities

,

Security Firms

,

Space & Research
Description
  • 8 × gigabit RJ45 port
  • Gigabit network access design
  • Network topology management, alarm push, network health monitor
  • Solid high-strength metal shell
  • Reliable fan-free design

Available models:

  • DS-3E1508-EI
  • DS-3E1508-EI

General

  • Shell : Metal material, fan-free design
  • Net Weight : 0.36 kg (0.79 lb)
  • Gross Weight : 0.660 kg (1.46 lb)
  • Dimensions (W × H × D) : 170.00 mm × 27.60 mm × 93.10 mm (6.69” × 1.09” × 3.67”)
  • Operating Temperature : 0 °C to 40 °C (32 °F to 104 °F)
  • Storage Temperature : -40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity : 5% to 95% (no condensation)
  • Relative Humidity : 5% to 95% (no condensation)
  • Power Supply : 5 VDC, 1 A
  • Installation Mode : Desk-Mounted; Wall-Mounted;
  • Max. Power Consumption : 5 W
  • Power Consumption In Idle : 3 W
  • Surge Protection : 6 KV

Network Parameters

  • Ports : 8 × Gigabit RJ45 port
  • MAC Address Table : 4 K
  • Switching Capacity : 16 Gbps
  • Packet Forwarding Rate : 11.91 Mpps
  • Internal Cache : 1.5 Mbits

Software Function

  • Link Aggregation : Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

    Support static link aggregation.

    Support 2 aggregation groups.

  • HPP : Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Display the port rate.

    2. Display the port bandwidth utilization rate.

    3. Display topology information.

    4. Display the alarm status.

    5. Restart ports and devices.

    6. Remotely upgrade the device.

  • Port Isolation : Ports 1 to 8: port isolation mode to improve network security

    Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

  • Loop Prevention : Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

    Support 802.1D STP.

    Suppport 802.1w RSTP.

  • VLAN : VLAN is used for network scale planning and network health improvement.

    Support 802.1Q.

    Configurable VLAN ID from 1-4094.

    Support Trunk, Access port mode.

    Support Max. 32 VLAN.

  • System Maintenance : Support device management via web.

    Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

    Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

    Support management via Hik-Central Pro.

    Support remote management via Hik-Partner Pro.

    Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

    Supports 802.1ab LLDP for peer device discovery.

    Support SNMP v1/v2c for third-party management platform access.

    Support port mirroring for fault locating.

Approval

  • EMC : CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),FCC (47 CFR Part 15, Subpart B),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
  • Safety : CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • Chemistry : CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)