16 Port Gigabit Smart Switch - Image 1
Click to enlarge
8 Port Gigabit Smart Switch
8 Port Gigabit Smart Switch
Back to products
24 Port Gigabit Smart Switch
24 Port Gigabit Smart Switch
Hikvision

16 Port Gigabit Smart Switch

Compare
SKU: DS-3E1516-EI V2(O-STD) Category: Tags: , , , ,
Additional information
Brand
Customer ApplicationAirports
Customer TypeAirports, Army, Commercial, Government Entities, Healthcare, Industrial, Jail / Prison, Law Enforcement, Medical, Navy / Coastal Protection, Oil & Gas, Other Businesses, Private Entities, Security Firms, Space & Research
Description
  • 16 × gigabit RJ45 ports.
  • Gigabit network access design.
  • Network topology management, alarm push, network health monitor.
  • Solid high-strength metal shell.
  • Reliable fan-free design.

Available models:

  • DS-3E1516-EI V2
  • DS-3E1516-EI

General

  • Shell : Metal material
  • Net Weight : 1.12 kg (2.47 lb)
  • Gross Weight : 1.96 kg (4.32 lb)
  • Dimensions (W × H × D) : 257.00 mm × 44.50 mm × 175.80 mm (10.12” × 1.75” × 6.92”)
  • Operating Temperature : 0 °C to 45 °C (0 °F to 113 °F)
  • Storage Temperature : -40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity : 5% to 95% (no condensation)
  • Relative Humidity : 5% to 95% (no condensation)
  • Power Supply : 220 VAC, 50/60 Hz, Max. 0.3 A
  • Installation Mode : Rack (equipped with mounting ears)
  • Max. Power Consumption : 12 W
  • Power Consumption In Idle : 10 W
  • Surge Protection : 6 KV

Network Parameters

  • Ports : 16 × Gigabit RJ45 port
  • MAC Address Table : 8 K
  • Switching Capacity : 56 Gbps
  • Packet Forwarding Rate : 41.66 Mpps
  • Internal Cache : 4.1 Mbits

Software Function

  • Port Isolation : Ports 1 to 16: port isolation mode to improve network security

    Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

  • Link Aggregation : Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

    Support static link aggregation.

    Support 1 aggregation group(s).

  • Loop Prevention : Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

    Support 802.1D STP.

    Suppport 802.1w RSTP.

  • VLAN : VLAN is used for network scale planning and network health improvement.

    Support 802.1Q.

    Configurable VLAN ID from 1-4094.

    Support Trunk, Access port mode.

    Support Max. 32 VLAN.

  • System Maintenance : Support device management via web.

    Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

    Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

    Support management via Hik-Central Pro.

    Support remote management via Hik-Partner Pro.

    Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

    Supports 802.1ab LLDP for peer device discovery.

    Support SNMP v1/v2c for third-party management platform access.

    Support port mirroring for fault locating.

  • HPP : Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Display the port rate.

    2. Display the port bandwidth utilization rate.

    3. Display topology information.

    4. Display the alarm status.

    5. Restart ports and devices.

    6. Remotely upgrade the device.

Approval

  • EMC : CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • Safety : CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • Chemistry : WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006),CE-RoHS (2011/65/EU)