24 Port Gigabit Smart Switch - Image 1
Click to enlarge
16 Port Gigabit Smart Switch
16 Port Gigabit Smart Switch
Back to products
8 Port Gigabit Smart POE Switch
8 Port Gigabit Smart POE Switch
Hikvision

24 Port Gigabit Smart Switch

Compare
SKU: DS-3E1524-EI V2(O-STD) Category: Tags: , , , ,
Additional information
Brand
Customer ApplicationAirports
Customer TypeAirports, Army, Commercial, Government Entities, Healthcare, Industrial, Jail / Prison, Law Enforcement, Medical, Navy / Coastal Protection, Oil & Gas, Other Businesses, Private Entities, Security Firms, Space & Research
Description
  • 24 × gigabit RJ45 ports.
  • Gigabit network access design.
  • Network topology management, alarm push, network health monitor.
  • Solid high-strength metal shell.
  • Reliable fan-free design.

Available models:

  • DS-3E1524-EI V2
  • DS-3E1524-EI

General

  • Shell : Metal material, IP40
  • Net Weight : 1.62 kg (3.57 lb)
  • Gross Weight : 2.545 kg (5.61 lb)
  • Dimensions (W × H × D) : 335.00 mm × 44.50 mm × 175.80 mm (13.19” × 1.75” × 6.92”)
  • Operating Temperature : 0 °C to 45 °C (0 °F to 113 °F)
  • Storage Temperature : -40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity : 5% to 95% (no condensation)
  • Relative Humidity : 5% to 95% (no condensation)
  • Power Supply : 220 VAC, 50/60 Hz, Max. 0.7 A
  • Installation Mode : Rack (equipped with mounting ears)
  • Max. Power Consumption : 13 W
  • Power Consumption In Idle : 5 W
  • Surge Protection : 6 KV

Network Parameters

  • Ports : 24 × Gigabit RJ45 port
  • MAC Address Table : 8 K
  • Switching Capacity : 56 Gbps
  • Packet Forwarding Rate : 41.66 Mpps
  • Internal Cache : 4.1 Mbits

Software Function

  • Link Aggregation : Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

    Support static link aggregation.

    Support 8 aggregation groups.

  • HPP : Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Display the port rate.

    2. Display the port bandwidth utilization rate.

    3. Display topology information.

    4. Display the alarm status.

    5. Restart ports and devices.

    6. Remotely upgrade the device.

  • Port Isolation : Ports 1 to 24: port isolation mode to improve network security

    Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

  • Loop Prevention : Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

    Support 802.1D STP.

    Suppport 802.1w RSTP.

  • VLAN : VLAN is used for network scale planning and network health improvement.

    Support 802.1Q.

    Configurable VLAN ID from 1-4094.

    Support Trunk, Access port mode.

    Support Max. 32 VLAN.

  • System Maintenance : Support device management via web.

    Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

    Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

    Support management via Hik-Central Pro.

    Support remote management via Hik-Partner Pro.

    Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

    Supports 802.1ab LLDP for peer device discovery.

    Support SNMP v1/v2c for third-party management platform access.

    Support port mirroring for fault locating.

Approval

  • EMC : CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • Safety : CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • Chemistry : CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)