The MCC 24-12 VDC 20A Multifunctional DC/DC B2B Charger, equipped with current limitation and a common ground, provides a three-stage charging process to ensure fast, efficient, and safe charging. This process enhances battery performance and prolongs battery life. The step-down converter delivers a stabilized 12V DC supply to devices while the battery outputs 24V. It also supports parallel usage.
- DC-DC converter with current limitation
- Designed to convert 24 VDC to 12 VDC and/or to charge 12 V batteries
- Multi step charge characteristics, programmable
- Delivered with temperature sensor as standard
- Can be used as dimming device for DC lighting
- High quality industrial design for high reliability and longer life cycle
Product specifications
| ARTICLE NUMBER |
| 60110015 |
MCC 24-12 VDC 20 A |
| DIMENSIONS & WEIGHT |
| Length x width x height, mm (in.) |
50 x 126 x 88 (2 x 5 x 3.5) |
| Weight, kg (lb.) |
0.955 (2.1) |
| TECHNICAL SPECIFICATIONS |
| Converter type |
voltage step down and stabilization 3-step 12 V battery charger, light dimmer function |
| OUTPUT |
| Nominal output voltage |
13.6 VDC |
| Voltage adjustable |
12 .. 15 VDC |
| Output accuracy |
2% |
| Ripple, peak output voltage |
1% |
| maximum power output |
300 W |
| continuous output power |
270 W |
| Maximum output current |
20 A |
| Continuous output current at 40 °C |
up to 20 A |
| GENERAL |
| Efficiency |
>90% |
| consumption no load |
<30 mA |
| Ambient operating temperature |
-10°C .. +40°C |
| Storage temperature |
-25° .. +85°C |
| Relative humidity in use |
up to 95%, non-condensing |
| Galvanic isolation |
Yes, 500 Vac |
| Cooling |
Mechanical |
| PROTECTIONS |
| Current / short circuit |
Restricted by current rating |
| Overheating, shut down |
Power restricted by temperature |
| MECHANICAL SPECIFICATIONS |
| Faston in / off, max thread thickness |
6 mm² |
| Mounting holes |
dia 4 mm, rh 91 × 177 |
| International Protection rating |
IP20 |
| Housing |
frame 8 |
| Housing material |
Alu / ABS |
| Housing colour |
RAL 9006 blank alu RAL 9011 graphite black |
| Meets the following Standards |
EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice. |
