The DC Modular Remote Battery Switch 24 V / 500 A is a smart high current magnetic latching contactor, that can handle continuous DC currents of up to 500 Amps. The Remote Battery Switch 24 V / 500 A can easily be installed in an engine room or battery compartment while being controlled from a more convenient location by a small panel mounted switch. But the Switch can for instance also be controlled by a battery monitor or Lithium battery, as a discharge/overcharge protection.
- Equipped with a 5 wire interface cable
- No current draw from the battery when the contact is closed
- Protected against high/low supply voltage and high temperature
- Smart function to automatically fix light to medium contact weldings
- Ignition protected according to ISO8846
Product specifications
| ARTICLE NUMBER |
| 50214734 |
Remote Battery Switch 24 V / 500 A |
| DIMENSIONS & WEIGHT |
| Length x width x height |
150 x 50 x 94 mm (5.9″ x 2″ x 3.7″ inch) |
| Weight |
0.8 kg (1.8 lb.) |
| TECHNICAL SPECIFICATIONS |
| Rated voltage |
60 VDC |
| Nominal current |
500 A |
| Cranking current (1min.) |
1000 A |
| Nominal make / break current |
500 A (0..34 Vdc) / 350 A (35..60 Vdc) |
| Peak make / break current |
1600 A (0..34 Vdc) / 1200 A (35..60 Vdc) |
| Coil / supply voltage (+Vdc) |
14..34 VDC |
| Coil / supply current (idle state)1) |
< 100 uA |
| Coil / supply current (state change)1) |
< 3 A |
| GENERAL |
| Remote control |
By control wires |
| Local control2) |
Top side buttons (On/Standby, Close contact, Open contact) |
| Indicators |
Top side LEDs for Contact open, Contact closed, Error and Setup |
| Mechanical life |
100000 cycles |
| Electrical life |
10000 cycles |
| Operating temperature range |
-20..+60°C |
| Connection stud size |
M10 |
| DC Modular grid size |
1×3 |
| Protection class |
IP65 |
| Standards |
CE certified (EMC Directive 2014/30/EU, Low voltage Directive 2014/35/EU, RoHS Directive 2011/65/EU and Ignition protection standard ISO 8846) |
