SMD601 Plus CEIA High Sensitive Walkthrough Metal Detector

• Most sensitive WTMD, fully compliant with the NIJ-0601.02 and NIJ-0601.03 Standards
• Quick, accurate analysis of all parts of the body of people in transit, from the shoe level to the crossbar
• Accurate pinpointing of individual and multiple metal targets
• Exceptional immunity to external interferences
• New mechanical structure with high protection degree
• Integrated correctional profiling system (optional)
• Unmatched reliability

The SMD601 Plus is a very high sensitive Walk-Through Metal Detector. A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threats and a reduction or elimination of the need for manual searches. SMD601 Plus detects even the smallest metal items anywhere on or in the body.

Fully compliant with the NIJ-0601.02 and NIJ-0601.03 standards

The SMD^®601 Plus further extends the detection sensitivity of the previous SMD^®601 to metal threats before considered undetectable due to their minimal dimensions and metal composition similar to the ones specified in the new NIJ-0601.03 Standard.

Accurate detection of all metallic threat items

• Very accurate pinpointing of individual and multiple metal targets
• Quick, accurate analysis of all parts of the body of people in transit, from the shoe level to the crossbar
• Built-in programs to screen visitors and staff for weapons and contraband

New certified ip66 control unit enclosure

• Total compatibility with previous control units
• Robust structure through the use of high-performance polymers for the construction of housing
• Waterproof / Dustproof: IP66 compliant (IEC 60529)
• Exceptional impact resistance at low and high temperatures and resistance to corrosion from atmospheric agents
• Display made with specific polymer to improve the visibility of the LEDs by increasing the definition and clarity

Unique alarm signaling

• 20 vertical localization zones
• High visibility of the control unit and of the zone indication, independent from the operator position and the installation environment
• Flexible Acoustic Alarm Signalling System: 10 Continuous and Pulsed Tones; 34 Special Sounds
• 10 Alarm Volume Levels
• High Precision Transit Counter: In-Bound transits; Out-Bound transits; Alarm rate

Most powerful and versatile security features

• Over 40 built-in Security Programs: Up to 22 pre-programmed Security Programs; Up to 20 user programmable Security Programs
• Chip Card system for fast, simple and secure parameter changes (i.e. alarm volume and tone, counter reading, etc.) and security level selection.
• Any security standard can be enhanced with selectable random alarm probability

Chip card system

The system allows Security Management to set the Security Level quickly, reliably and without having to program the device in any way.

Gate structure

• State-of-the-art, robust and washable panels
• Antivandalic and antitampering IP66 control unit
• Embedded high precision transit counters (2-beam photocells)
• Antitampering ON/OFF switch
• Protected against aging, weather and wear

Operational features

• High discrimination and transit flow rates five or more times greater than other metal detection systems
• Quick reset time as short as 0.2 seconds for high throughput rate
• Very high detection speed (up to 15 m/sec.)
• Built-in operational functional verification (OFV)
• One-touch key reading of inbound, outbound and Security Level Data

Quality

• Continuous self diagnostic system
• Proven reliability
• No periodic re-calibration and preventive maintenance required
• No scheduled maintenance
• Fully digital design

Alarm signaling

• Multi-zone display bar for “height on person” localization
• 20 vertical localization zones
• 2 display bars programmable as zone indicators and/or pacing lights
• Specific shoe alarm color indication
• Green and red metering signals proportional to the mass of the detected target
• 10 selectable continuous and pulsed tone plus 34 special tones
• 10 selectable sound intensities ranging from 0 to 90 dbA at 1m
• Random alarm capability with independent counters, alarm tone and alarm volume
• Met-Identity technology (separate Ferrous and Non-Ferrous alarm signaling)

Type of signaling

• Fixed or proportional to the mass in transit – visible from 6m under lighting of 4000lux
• 20 x4 distinct zones (20×2 entry side and 20×2 exit side)

Programming

• Over 40 built-in Security Programs
• Remote via Infrared Remote Control Unit, BT or Ethernet 10/100 base T (option) interface
• Security level: International Standard (IS) command / Chip card
• Local by Control Unit alphanumeric display and keyboard
• Programming and chip card access protected by user and super-user passwords

Installation data

• Automatic synchronization between two or more metal detectors with distance of down to 5 cm without the use of external cables
• One Touch Automatic Self Installation (OTS)

Certification and compliance

• Fully compliant with the NIJ-0601.02 Standard requirements
• Complies with the applicable Standards for Law Enforcement and Correctional Facilities
• Compliant with applicable International Standards for electrical safety and EMC
• Compliant with the applicable electromagnetic Standards on Human Exposure and Pacemaker Safety
• Harmless to magnetic media (CD, tapes, etc.)

Environmental data

• Powered by safe low voltage DC through external switching power supply adapter
• Power Supply : 100…277V~ ±10%, 47…63Hz, 50 VA typical consumption
• Operating temperature: -20°C to +65°C (-37°C to +70°C upon request)
• Storage temperature: -37°C to +70°C
• Relative humidity: 0 to 95% (without condensation)

Comprehensive support

• CEIA provides full operational and technical training support by certified personnel either at CEIA facility or at customer site. Crossbar battery back-up