The Voltage Battery Guard WVG 60 is an intelligent, fully waterproof, battery guard with expansion capabilities for an on / off switch, alarm buzzer or relay and our Battery Watch (not supplied).
- Provided with an ‘Automatic board system detection’
- Fully waterproof
Product specifications
| ARTICLE NUMBER |
| 60110250 |
WVG 60 |
| DIMENSIONS & WEIGHT |
| Length x width x height |
82 x 41 x 65 mm (3.2″ x 1.6″ x 2.6″ inch) |
| Weight |
0.730 kg (1.6 lb.) |
| TECHNICAL SPECIFICATIONS |
| Cable diameter |
15 mm2 |
| Automatic detection of 12V or 24V system |
8 – 20 V > 12 V mode / 20 – 35 V > 24 V mode |
| Adjustable undervoltage programs |
10 |
| Overvoltage disconnect voltage |
12 V mode > 16 / 24 V mode > 32 V |
| Maximum load / shutdown |
approx 60 A – 65 A |
| Surge |
120 A |
| Voltage drop |
0,1 V @ 60 A |
| Current consumption |
Output active: 4 mA / Output active: 2 mA |
| Shutdown at overload / short circuit |
After 5 seconds (switch on again after 1 minute) |
| Voltage accuracy |
2% |
| Current accuracy |
20% |
| IP-code |
IP66 |
