EMA series Liquid Explosive Detector CEIA
EMA series CEIA Liquid Explosive Detector
- Accurate automatic inspection of sealed and unsealed LAGs (Liquids, Aerosols and Gels) in ~ 5 sec. (Type B) and ~ 4 sec. (Type A – Optional)
- Compact size and ergonomic design
- Certified to screen liquids in clear, colored and opaque plastic and glass, metal and metallized containers
- Very low combined Nuisance Alarm Rate: < 0.4%
- No-ionizing source or part in movements
- No maintenance required
EMA series Liquid Explosive Detector CEIA
Product Specifications
| Alarm Indication | Green – OK / Yellow – medium-intensity alarm / Red – high-intensity alarm |
|---|---|
| Alarm Output | Visual display and acoustic alarm |
| Applications | Airports / aviation security / customs / border control / government facilities / courts / prisons / security checkpoints |
| Calibration | Automatic continuous calibration with manual Pass/No-Pass verification capability |
| Certification | ECAC Standard 3 certified for Type B Liquid Explosive Detection Systems |
| Container Capacity | Commercial bottles from 100 ml to 2000 ml |
| Container Materials | Plastic / glass / metal / metallized containers/ including clear/ colored and opaque containers |
| Container Shape | Containers of different shapes can be inspected |
| Detectable Substances | Explosive precursors and explosive liquids |
| Detection Method | Automatic analysis of the entire contents of the container without opening it |
| Detection Technology | Multiple simultaneous sensing technologies including Wideband RF/ Infrared (IR)/ Magnetic Inductive and Gravimetric sensing |
| Housing | AISI 304 stainless steel with anti-fingerprint surface treatment |
| Installation | Compact footprint with minimal installation space requirements |
| Interfaces | RS-232 serial interface / Ethernet network interface |
| Key Advantage | Allows security personnel to inspect sealed liquid containers for potential explosive liquids without opening or manually sampling the bottle |
| Laser | No laser source |
| Maintenance | No periodic maintenance or consumables required |
| Manufacturer | CEIA |
| Mechanical Design | Solid-state system with no moving mechanical parts |
| Mobile Option | EMA Mobile Station available/ Part Code #70900 |
| Networking | CEIA NetID Management software for programming/ statistical data collection/ maintenance and firmware upgrades |
| Nuisance Alarm Rate | Less than 0.4% combined |
| Operating Humidity | 0–95% non-condensing |
| Operating Principle | Weak |
| Operating Temperature | 0°C to +40°C |
| Operator Training | Minimal operator training required |
| Power Consumption | 15 W |
| Power Supply | 115/230V AC ±15%/ 50/60 Hz ±10% |
| Primary Application | Detection of explosive liquids and explosive precursors in liquids/ aerosols and gels (LAGs) |
| Product Name | CEIA EMA Series Liquid Explosive Detector |
| Product Type | Liquid Explosive Detection System (LEDS) |
| Protection Rating | IP20 |
| Radiation | No ionizing radiation and no radioactive sources |
| Self-Diagnostics | Built-in automatic calibration and self-diagnosis system |
| Storage Humidity | 0–98% non-condensing |
| Storage Temperature | -10°C to +60°C |
| TSA Status | TSA qualified |
| Type A Analysis Time | Approximately 4 seconds |
| Type A Analyzer | Optional integrated analyzer for open containers |
| Type A Certification | ECAC Standard 3 certified for Type A Liquid Explosive Detection Systems |
| Type B Analysis Time | Approximately 5 seconds |
| Weight | 17 kg Type B only / 17.5 kg Type B + Type A |
EMA Liquid Analyzer Datasheet
EMA series CEIA Liquid Explosive Detector
- Accurate automatic inspection of sealed and unsealed LAGs (Liquids, Aerosols and Gels) in ~ 5 sec. (Type B) and ~ 4 sec. (Type A – Optional)
- Compact size and ergonomic design
- Certified to screen liquids in clear, colored and opaque plastic and glass, metal and metallized containers
- Very low combined Nuisance Alarm Rate: < 0.4%
- No-ionizing source or part in movements
- No maintenance required
The EMA is a compact device designed for the analysis of liquid containers and their contents with the goal of detecting the possible presence of explosive precursors and explosive liquids. When the operator places the bottle in the inspection cavity, its presence is automatically detected and the analysis is performed in ~ 5 seconds.
General description
The EMA is a compact device designed for the analysis of liquid containers and their contents with the goal of detecting the possible presence of explosive precursors and explosive liquids. The content of the bottles is analyzed without the need to open the container as the detection is effected using simultaneous multiple sensing technologies. The housing of the analyser, which is extremely robust, durable and easy to clean, is made of AISI 304 Stainless Steel and anti-friction plastic.
The Analyser consists of a main body, a control panel and an analysis compartment. In case of open containers such as cups and thermos flasks, it is possible to carry out the analysis by means of the type A integrated analyser (optional), using small disposable plastic sample cups to be inserted into an external probe.
Inspection of bottles or containers
- Independently of their shape
- Made of different materials
- In a wide range of capacity
CEIA EMA and LEDS Requirements
Type B Liquid Explosive Detection Systems are intended for the inspection of individual liquid containers with the purpose of detecting explosives and their precursors, according to the current Regulation Authority requirements (EU Reg. No 185/2010). As containers can be made of different materials and can have different geometry and volume, the use of multiple simultaneous physical principles is necessary for a reliable and secure screening.
The CEIA EMA analyzer family design started in 2003; since then the number of sensors installed on-board have been growing in order to comply with the increasing requirements on the liquid threats to be detected and on the kind of containers to be inspected. The comprehensive set of sensors installed on the equipment makes the EMA liquid analyzer a unique machine on the market providing very high security and set for future detection requirements. The CEIA EMA includes an EU Standard 3 Certified type A analyzer (optional) to screen loose liquids, open containers or following to an alarm on the type B section. A disposable cup allows sampling and measurement of a minimum quantity of liquid to be analyzed.
Operating principle
- When the operator places the bottle in the inspection cavity, its presence is automatically detected and the analysis is performed in ~ 5 seconds.
- The fields generated in the inspection cavity are weak in intensity and non-ionizing, therefore completely safe for the liquids and for the operator.
- The fields interact with containers and with their content. The entire volume is analyzed in order to verify its conformity with allowed liquids.
- After a few seconds, the unit provides an OK or ALARM message without requiring any data interpretation by the operator.
- Calibration is carried out automatically by the unit.
Key features
- Integrated Type B and Type A Standard 3 certified System
- Automatic inspection of any type of containers
- Inspection time in ~ 5 seconds (type B) and ~ 4 seconds (type A)
- Multiple simultaneous sensing technologies
- Minimum installation space
- Minimum operator training required
- All solid state
- No mechanical parts in movements
- No-ionizing or laser sources
- No maintenance required
Multiple sensing technology
- Wideband Radio Frequency (R.F.)
- Infrared (IR)
- Magnetic Inductive
- Gravimetric
Inspection Characteristics
- Commercial Bottles of any shape and materials including plastic, glass, metal with capacity ranging from 100 ml to 2000 ml
- Type A sample cups volume: 10 ml
- Initial Start-up time: 15 sec. max
- Analysis type: automatic
- Analysis time: 5 sec. typical (type B) and 4 sec. typical (type A)
Detectable substances
- Explosive precursors and explosive liquids
Alarm Signaling
| Light color | Display message | Meaning |
| Green | OK | Allowed liquid |
| Yellow | Not allowed product | Alarm of medium intensity |
| Red | Not allowed product | Alarm of high intensity |
Acoustic alarm Threat classification available Operator interface
- Easy to read high-contrast graphic display
- High durability stainless steel function keys
- Programmability of all the parameters protected by passwords
Function and calibration control
- Automatic calibration, continuously running
- Manual verification of calibration, performed by the operator through Pass/No-Pass reference test pieces (according to the operational procedures)
Communication capability
- RS-232 serial interface
- Ethernet network interface
Remote control and Ethernet Networking Functions
- Available through the CEIA NetID Management software
- Programming
- Statistical Data Collection
- Maintenance
- Firmware upgrade
Degree of protection
- IP 20 (IEC 60529)
Weight
- 17 kg (type B only)
- 17.5 kg (type B and type A)
Main Electronics Features
- High integration SMT
- 32-bit flash-based microcontrollers
- 32-bit DSP
- Low power and high reliability
- Very low power inspection field, confined in the analysis compartment, completely safe for both the operator and the liquid
- No ionizing radiation or radioactive sources
- No laser sources
Main Mechanical Features
- Constructed entirely in AISI304 Stainless Steel
- Anti-fingerprint surface treatment
- Rugged and Durable
- Compact and Aesthetically pleasing
Installation and Maintenance
- Automatic adjustment to environmental conditions
- No initial or periodic calibrations required
- Firmware upgradeable via RS232 or Ethernet interface
- No periodical maintenance or consumables required
- Built-in automatic calibration and self-diagnosis system
Certification and conformity
- Standard 3 Certified according to ECAC performance requirements for Type B Liquid Explosive Detection Systems
- Standard 3 Certified according to ECAC performance requirements for Type A Liquid Explosive Detection Systems
- Conforms to the currently applicable International Standards for Electrical Safety and EMC
Power Supply
- 115/230V~ ±15%, 50/60 Hz ±10%, 15W
Environmental conditions
- Operating temperature: 0°C to +40°C
- Storage temperature: -10°C to +60°C
- Operating Relative humidity: 0 to 95% (without condensation)
- Storage Relative humidity: 0-98%, without condensation
NATO Stock Number
- 6665-151805235
- 6665-151805236
Type A analyzer (optional)













