LED ControllerLED Controller
| Brand | Hikvision |
|---|---|
| Customer Application | Airports |
| Customer Type | Airports, Army, Commercial, Government Entities, Healthcare, Industrial, Jail / Prison, Law Enforcement, Medical, Navy / Coastal Protection, Oil & Gas, Other Businesses, Private Entities, Security Firms, Space & Research |
- Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device
- Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled
- An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.
- The mosaic source is composed of several input connectors of the same type.
- Work with software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality
- Up to 4 units cascaded for image mosaic
- Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
Available models:
- DS-D42V10-N
- DS-D42V10-N(V2)
Processing Performance
- Brightness Control : 1-100 Levels
- Frame Frequency : 25HZ-60HZ
- Grey Level : 256
- Display Color : 1 Billion
- Processing Depth : 8bit
- Image Scaling : Support
Product Model
- Product Model : DS-D42V10-N
Chassis
- Chassis Height : 1.12U
- Chassis Width : 351.2mm
Product Type
- Product Type : LED Controller
LED Controller Power
- Average Consumption : ≤28W
- Number Of Power Interfaces : 1
- Power Interface Specifications : 100-240V~，1.6A，50/60Hz
General
- Working Temperature : 0°C ～ 45°C
- Storage Humidity : 10% ～ 95%
- Working Humidity : 20% ～ 90%
- Storage Temperature : -20°C ～ 70°C
- Packaging Size (W × H × D) : 521.0mm ×517.0mm ×102.0mm
- Net Weight : 4kg
- Gross Weight : 6.8kg
- Dimensions (W × H × D) : 483.6mm×351.2mm×50.1mm
- Packing List : DS-D42V10-N*1,Power Cable *4,Ethernet Cable *1,HDMI Cable *1,HDMI TO DVI Cable *1,USB Cable*1
Audio Input
- Audio Input Interface : (S)1
- Audio Input Interface Type : HDMI inline
Video Input
- Video Input Interface : (S)5
- Video Input Interface Type : 2 HDMI1.4+1 3G-SDI+2 DVI
- Max. Input Resolution : 4K*1K
- Video Input Resolution : HDMI1.4 interface
Maximum support of 3840 x 1080@60Hz /3840 x 2160@30Hz Video source input.
Supports HDCP 1.4.
Interlaced signal input is not supported.
Supports two HDMI 1.4 splicing inputs.
Support custom resolution.
Custom maximum width: 4092 (4092 x) 1136@60Hz ）
Custom maximum height: 3981 (1060 x 3981@60Hz ）
HDMI 1.4 1 supports LOOP loop output.
SDI interface
Supports ST-424 (3G), ST-292 (HD), and ST-259 (SD) standard video source inputs.
Single channel support 1920 x 1080@60Hz Video source input.
Support de interlacing processing.
Input resolution and bit depth settings are not supported.
Supports 3G-SDI Loop output.
DVI interface
Maximum support of 3840 x 1080@60Hz /3840 x 2160@30Hz Video source input.
Supports HDCP 1.4.
Interlaced signal input is not supported.
Supports two HDMI 1.4 splicing inputs.
Support custom resolution.
Custom maximum width: 4092 (4092 x) 1136@60Hz ）
Custom maximum height: 3981 (1060 x 3981@60Hz ）
DVI supports LOOP loop output.
Supports two DVI splicing inputs.
DVI 1 supports LOOP loop output.
- Video Input Processing Characteristics : Processing depth 8
Sampling format
RGB:444
YUV:4:4:4
YUV:422
Video Output
- Max. Output Resolution : 6.5 Million
- Loading Capacity For Video Output To LED : Single port with load 650000
Width 1~10240
Height 1~8192
- LED Loading Interfaces : 10
- LED Loading Interface Type : RJ45
- Number Of Video Ring Pass Output Interfaces : 2
- Video Looping Output Interface Type : HDMI 1.4+DVI
- Video Looping Output Resolution : 3840*1080@60Hz
Audio Output
- Audio Output Interface : (S)NA
- Audio Output Interface Type : NA
Front Panel
- Screen : LCD screen
- Key :
“\”knob\”\”: Select menus, adjust parameters, and confirm operations.
\”ESC\”\”: Exit the menu or cancel the operation.
\”MAIN/PIP 1/PIP 2\”\”: Layer on, off, and layer state display.
\”SCALE\”\”: Full screen auto zoom shortcut key, adaptively fills the window with the lowest priority to full screen.
\”PRESET\”\”: Enter the scene settings menu.
\”TEST\”\”: Enter the test screen settings menu.
\”FREEZE\”\”: Freeze the output screen.
\”FN\”\”: Customizable function shortcut key.
\”HDMI1/HDMI2/DVI1/DVI2/SDI\”\” Input source status display, supporting one click switching of the main window input source.”
- Pilot Lamp :
“\”MAIN/PIP 1/PIP 2\”\”: Long blue light: The layer is turned on.
Blue flashing: The layer is currently being edited.
Long white light: The layer is not turned on.
\”SCALE\”\”:Long blue light: Full screen automatic scaling is enabled.
Long white light: Full screen auto zoom is not enabled.
\”HDMI1/HDMI2/DVIDVI2/SDI\”\”: Long blue light: There is an input source connected.
Blue flashing: No input source connected, already used by the layer.
Long white light: No input source connected or input source abnormal.
Control Interface
- Control Network Port :
“1 RJ45, 10M/100M/1000M adaptive Ethernet ports
Connect and control the computer or router.”
- 3D Interface : NA
- IR Input : NA
- Serial Interface : 1, 1 debug serial port (RJ45)
- Light Perception : LIGHT SENSOR：Connect the optical probe to obtain ambient brightness, which can achieve automatic adjustment of screen brightness.
- USB : 2 x USB 2.0
- On-Off : Switch